S7 Carbon steel Separator DN65 to DN350
The S7 is a carbon steel baffle type separator for the efficient removal of entrained liquids from steam, air and gas systems.
A suitable steam trap (FT) or liquid drainer (CA) is required to drain the collected condensate / liquid depending on the application:
For steam service fit an FT ball float steam trap and AV air vent
For air / gas service fit a CA ball float liquid drainer
Standards
This product fully complies with the requirements of the European Pressure Equipment Directive 97 / 23 / EC and is designed and manufactured in accordance with EN 13445:2002
'Unfired Pressure Vessels'.
Certification
This product is available with material certification to EN 10204 3.1 as standard. A full data dossier is available at extra cost
Note: All certification / inspection requirements must be stated at the time of order placement.
Sizes and pipeline connections
DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300 and DN350.
Flanged EN 1092 PN16 or PN40 with screwed BSP vent and drain connections.
Flanged ASME B16.5 Class 150 and 300 with screwed NPT vent and drain connections.
Flanged JIS / KS 20K with screwed BSP vent and drain connections.
Screwed, socket weld and other connections are available to special order.
Materials
All components of the S7 are manufactured from carbon steel. For a complete stainless steel version (S8) see TI-P138-10.
How to order
Example: 1 off Spirax Sarco DN80 S7 carbon steel separator with PN40 fl anges. S uitable for pressures up to 25 bar (please specify design conditions).
Installation note:
To ensure efficient drainage of condensate a suitable ball float trap and air vent should be installed. For air / gas applications a balance line is required between the CA trap and the main line or top of the separator.
