FT14 Ball Float Steam Trap (Screwed) Spirax Sarco
The FT14 by Spirax Sarco is a nodular cast iron steam trap with a closed float and built-in thermostatic air vent in stainless steel. The FT14 can be maintained without being removed from the pipeline.
The steam trap can be installed in a horizontal (R-L & L-R) or vertical (V) pipeline with the arrow on the housing indicating the flow direction. The flow direction of the steam trap can be changed: loosen the 4 bolts of the cover, rotate the housing according to the pipeline connections, and reassemble the cover with the arrow on the nameplate always vertically downward. Use a new cover gasket each time during assembly. The anti-steam stop system of the FT14-.. C is delivered in the open position. Close the needle valve clockwise.
Available Options:
FT14 (L-R) Flow direction from left to right
FT14 (R-L) Flow direction from right to left
FT14V Flow direction vertically downward
Capsule:
The BP99/32 capsule used in the FT14 is suitable for steam at 150C superheated @ 0 bar eff. and 50C superheated @ 32 bar eff.
European Pressure Equipment Directive (PED):
This product by Spirax Sarco fully complies with the European Pressure Equipment Directive 97/23/EC.
Certificate:
These products are available with a "Type Test" certificate according to EN 10204 at an additional cost. Certificates are only provided if requested at the time of order.
Diameters and Connections:
", ", and 1" internal thread BSP, NPT available on request
Housing Design:
PN16
Technical Specifications:
PMA: Maximum allowable pressure 16 bar eff. @ 100C
TMA: Maximum allowable temperature 250C @ 13 bar eff.
