S13 Water Separator - Nodular Cast Iron
The S13 is a static separator designed to remove liquids from steam, compressed air, or other gases. It is equipped with a condensate drain at the bottom. The use of a customized insulation jacket improves the efficiency of the separator.
Standards:
These products fully comply with the European directive regarding Pressure Equipment.
Certificates:
Available with 'Test Report'. Certificates are provided only upon request when ordering.
Diameters and Connections:
DN40, DN50, DN65, DN80, DN100, DN125, DN150, and DN200.
Flanges according to EN 1092 PN16 or PN25, with BSP threaded connection for the drain.
Flanges according to JIS / KS 10K with BSP drain.
Flanges according to JIS / KS 20K with BSP drain (only DN40, DN50, DN65, and DN200).
Pressure and Temperature Limits:
Refer to the datasheet for information.
Installation:
In a horizontal pipeline with a drain at the bottom. Proper drainage is ensured only when a suitable condensate drain is installed at the outlet (E) at the bottom of the separator.
