AE30 Automatic Air Eliminators/Air and Gas Vents for Liquid Systems
The AE30 vents are designed for the automatic venting of water systems. The housing and cover are made of a special brass alloy resistant to dezincification (DZR).
Available types:
AE30 Vent
AE30A Vent with built-in check valve
AE30B Vent with valve
AE30C Vent with built-in check valve and valve
The valve (for types AE30B and AE30C) is a built-in ball valve that can be closed with a special key (not included as standard with the purchase of the vent).
Standards:
These products fully comply with the European Directive on Pressure Equipment.
Certificates:
Available with a "Type Test Report" certificate. Certificates are only provided upon request when ordering.
Diameters and Connections:
AE30, AE30A: Inlet internal thread, outlet external thread BSP or NPT
AE30B, AE30C: Inlet external thread, outlet external thread BSP
Pressure and temperature limits:
see datasheet
Installation:
The vent must be vertically mounted with the inlet downwards. All automatic vents for liquids can 'weep' due to dirt deposits on the valve. It is therefore advisable to provide a drain line from the outlet to a safe location.
