M10S2RB / M10S4RB Ball Valve
Three-piece ball valve, designed for applications with steam and other industrial fluids, ranging from vacuum to high pressure and temperature. The ball valve is designed as a shut-off valve, not as a control valve. Maintenance of the versions with threaded connections, SW, and BW can be done without disassembling from the pipeline.
Available types:
- M10S2_ _ Housing in galvanized steel, PDR 0.8 seats
- M10S4_ _ Fully in stainless steel, PDR 0.8 seats
The nomenclature will be followed by FB (full bore) or RB (reduced bore).
Standards:
These products fully comply with the European Pressure Equipment Directive.
Certificates:
These products are available with a certificate according to EN 10204 3.1. Certificates are only provided if requested at the time of order.
Diameters and connections:
see datasheet
Pressure and temperature limits:
see datasheet
Welding:
Only the versions with welding connections (SW, BW, Imperial Tube) may be welded. Valves with SW and BW must be disassembled before welding them into the pipeline. Weld the ends separately into the pipeline and reassemble the components. Ball valves with threaded or flange connections must not be welded into the pipeline to prevent damage to the valve and injuries to personnel.
