PN600 Series Pneumatic Controllers
The pneumatic controller type PN 600 is suitable for temperature and pressure control, delivering an output signal of 0.2 to 1 bar. The controller is available with a proportional (with manual reset) and proportional-integral control action. The pneumatic controller can be used in combination with the linear pneumatic servomotors type PN 5000, PN 6000, PN3000, and PN4000, and the pneumatic valve positioner type PP5M.
Available Types for Temperature Control:
- Type: 662-T5-M5-E11, Control Strategy: Proportional (+ manual reset), Control Range: 0 - 100C
- Type: 662-T5-M5-E11, Control Strategy: Proportional (+ manual reset), Control Range: 25 - 125C
- Type: 662-T6-M5-E11, Control Strategy: Proportional (+ manual reset), Control Range: 0 - 100C
- Type: 662-T6-M5-E11, Control Strategy: Proportional (+ manual reset), Control Range: 50 - 150C
- Type: 663-T5-M5-E11, Control Strategy: Proportional + Integrating, Control Range: 0 - 100C
- Type: 663-T6-M5-E11, Control Strategy: Proportional + Integrating, Control Range: 0 - 100C
- Type: 663-T6-M5-E11, Control Strategy: Proportional + Integrating, Control Range: 50 - 150C
T5: Nitrogen-filled thermometric element for liquids.
T6: Nitrogen-filled thermometric element for gases.
M5: Length of the capillary: 5 m.
Pressure Control:
See datasheet.
Options On Request:
- Pneumatic Receiver: Input Signal 0.2 to 1 bar (3 to 15 psi)
- Electromechanical Receiver: Input Signal 4 to 20 mA, 0 to 10 Vdc Pt100, and Thermocouple.
Other Measurement Ranges:
- Pressure (bar): 0 to 500 bar
- Temperature (C): Measurement ranges of 50, 75, 100, 150, 200, 300, or 400C
